+27 (0)11 022 5323 +27 (0)72 435 0005
R
- -
Funnel Filter:
Microcontroller Type
PIC (8-bit) What's This?
PIC (16-bit) What's This?
PIC (32-bit)
AVR
ARM
FT90x
8051
Other What's This?
MagnifierSearch:
General (Go to Parent Category)
These generic boards feature a prototyping area, MikroElektronika-standard IDC10 connectors for easily connecting add-on boards (except for the SMT microcontroller boards), serial UART to USB interface, and a reset button. Plastic enclosures (casings) are also available for the "Ready for ..." boards.

(i) Tip:The filter on the left can be used to narrow down the number of items in this category.
-
Ready for PIC (40-pin, 18F45K22)
 
PIC (8-bit)
Ready for PIC (40-pin, 18F45K22) Ready for PIC features all the basic components needed to start developing a microcontroller application using 28- and 40-pin PIC MCUs. Included is a PIC18F45K22 connected to a replaceable 8MHz crystal oscillator. The microcontroller's ports are exposed via four MikroElektronika-standard IDC10 headers to which add-on boards can be easily connected. A USB-UART module, prototyping area and a power supply circuit which can provide either 5V or 3.3V are also featured on the board.
The included PIC18F45K22 is pre-programmed with a USB bootloader, which means that no external programmer is required in order to use it.
R415  Qty:
Weight: 225g. Stock: 2 available immediately [i]. mikroE Icon
-
Ready for PIC (28-pin, 18F25K22)
 
PIC (8-bit)
Ready for PIC (28-pin, 18F25K22) Ready for PIC features all the basic components needed to start developing a microcontroller application using 28- and 40-pin PIC MCUs. Included is a PIC18F25K22 connected to a replaceable 8MHz crystal oscillator. The microcontroller's ports are exposed via four MikroElektronika-standard IDC10 headers to which add-on boards can be easily connected. A USB-UART module, prototyping area and a power supply circuit which can provide either 5V or 3.3V are also featured on the board.
The included PIC18F25K22 is pre-programmed with a USB bootloader, which means that no external programmer is required in order to use it.
R415  Qty:
Weight: 225g. Stock: 2 available immediately [i]. mikroE Icon
-
PIC-Ready2
 
PIC (8-bit)
PIC-Ready2 The PIC-Ready2 Board is a prototype board for 18-pin PIC microcontrollers. It features a prototyping area, MikroElektronika-standard IDC10 headers for easily connecting add-on boards, and a USB connector with the FT232R USB to serial UART interface device.
Note: Microcontroller not included
R415  Qty:
Est. Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
dsPIC-Ready1
 
PIC (16-bit)
dsPIC-Ready1 The dsPIC-Ready1 Board is a prototype board for 40-pin dsPIC microcontrollers, such as the dsPIC30F3011, dsPIC30F4011, etc. It features a prototyping area, MikroElektronika-standard IDC10 headers for easily connecting add-on boards, and a USB connector with the FT232R USB to serial UART interface device.
Note: Microcontroller not included
R415  Qty:
Est. Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
dsPIC-Ready2
 
PIC (16-bit)
dsPIC-Ready2 The dsPIC-Ready2 Board is a prototype board for 40-pin dsPIC microcontrollers, such as the dsPIC30F3014, dsPIC30F4013, etc. It features a prototyping area, MikroElektronika-standard IDC10 headers for easily connecting add-on boards, and a USB connector with the FT232R USB to serial UART interface device.
Note: Microcontroller not included
R415  Qty:
Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
dsPIC-Ready3
 
PIC (16-bit)
dsPIC-Ready3 The dsPIC-Ready3 Board is a prototype board for 28-pin dsPIC30F microcontrollers, such as the dsPIC30F2010, dsPIC30F3010, dsPIC30F4012, dsPIC30F2012, dsPIC30F3013, etc. It features a prototyping area, MikroElektronika-standard IDC10 headers for easily connecting add-on boards, and a USB connector with the FT232R USB to serial UART interface device.
Note: Microcontroller not included
R425  Qty:
Est. Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
dsPIC-Ready4
 
PIC (16-bit)
dsPIC-Ready4 The dsPIC-Ready4 Board is a prototype board for 28-pin dsPIC30F microcontrollers, such as the dsPIC30F1010, dsPIC30F2020, etc. It features a prototyping area, MikroElektronika-standard IDC10 headers for easily connecting add-on boards, and a USB connector with the FT232R USB to serial UART interface device.
Note: Microcontroller not included
R415  Qty:
Est. Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
Ready for AVR
 
AVR
Ready for AVR Ready for AVR features all the basic components needed to start developing a microcontroller application using 40-pin AVR MCUs. It comes with an ATmega16 connected to a replaceable 8MHz crystal oscillator. The board features four MikroElektronika-standard IDC10 headers for easily connecting add-on boards, USB-UART module, prototyping area and a power supply circuit.
The included ATmega16 is also pre-programmed with a USB bootloader, which means that no external programmer is required in order to use it.
R415  Qty:
Est. Weight: 225g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
AVR-Ready2
 
AVR
AVR-Ready2 The AVR-Ready2 Board is a prototype board for 28-pin AVR microcontrollers. It features a prototyping area, MikroElektronika-standard IDC10 headers for easily connecting add-on boards, and a USB connector with the FT232R USB to serial UART interface device.
Note: Microcontroller not included
R415  Qty:
Est. Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
mikroXMEGA
 
AVR
mikroXMEGA The mikroXMEGA Board is a small-package prototype board with the ATxmega128A1 device operating at 8Mhz. It can be programmed via USB bootloader or through it's JTAG connector. It features a FT232R USB to serial UART interface so that it can be easily connected to a PC. Explore the new XMEGA in an easy way.
R345  Qty:
Weight: 17g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
Ready for XMEGA
 
AVR
Ready for XMEGA Ready for XMEGA Board is the best solution for fast development of various microcontroller applications. It comes with ATXmega128A1. It contains double-row headers for all available MCU ports, USB-UART module, prototyping area and a power supply.
R500  Qty:
Est. Weight: 225g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
8051-Ready
 
8051
8051-Ready The 8051-Ready Board is a prototype board for 20-, 40- and 44-pin AVR microcontrollers. It features a prototyping area, MikroElektronika-standard IDC10 headers for easily connecting add-on boards, and a USB connector with the FT232R USB to serial UART interface device.
Note: Microcontroller not included
R345  Qty:
Est. Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-