+27 (0)11 022 5323 +27 (0)72 435 0005
R
- -
MultiMedia Systems From
R1,300*
Media focused boards which can be used to:
  • Develop and prototype microcontroller-based designs
  • Develop, test and debug software
  • Learn about microcontrollers
  • Integrate into a final product

Available for:
  • PIC (including PIC24, dsPIC and PIC32)
  • Atmel AVR
  • ARM
  • FT90x

Looking for more display solutions? Please see our Display Solutions Overview for more information on the various different types of systems which we have available. Need advice on which system might best fit your requirements? Please do not hesitate to contact us!

MikroMedia From
R1,450*
Main Boards
MikroMedia boards focus on visuals and audio.


All MikroMedia boards feature:
  • 320x240 Touch-screen TFT display.
  • 3.5mm headphone jack and VS1053 stereo MPEG codec.
  • MicroSD card slot.
  • USB.
  • ADXL345 Accelerometer.
  • M25P80 Serial Flash memory (8Mbit).
  • Lithium-polymer battery connector and charging circuit.
  • Reset button.
  • Bootloader/programmer (depending on board) - no external programmer necessary. PIC versions are compatible with the MikroProg programmer.
  • Example programs.
System
PIC
PIC24
PIC24EP
dsPIC33
dsPIC33EP
PIC32
XMEGA
ARM
Stellaris M3
Tiva M4
STM32 M3
STM32 M4

Shields / Accessories
MikroMedia Proto Shield
Battery Boost Shield
Li-Po Battery
mikroBus Shield for MikroMedia
mikroMedia Workstation v7 for PIC
Battery Boost Shield
The following add-on boards are available for the MikroMedia boards:
Shield / Accessory Price
Proto Shield - Adds a prototyping area. R105*
Connect Shield - Adds a prototyping area with screw-terminal connectors. R240*
Battery Boost Shield - Provides power using 2 X AAA batteries. R210*
mikroBus Shield - Allows connection of mikroBus ("click") accessory boards. R115*
Gaming Shield - Provides game-controller buttons, and speakers. R270*
mikroMedia Workstation v7 for PIC R1,850*
2000mAh Li-Po Battery R210*
Plastic Stylus (for Touch-Panel) R30*
Earphones R75.50*

MikroMedia Plus From
R2,850*
Main Boards
MikroMedia Plus boards feature:
  • 480x272 4.3" Touch-screen TFT display.
  • 3.5mm headphone jack and VS1053 stereo MPEG codec.
  • ADXL345 Accelerometer.
  • Lithium-polymer battery connector and charging circuit.
  • Nordic nRF24L01+ 2.4GHz RF transceiver with chip antenna.
  • MCP9700A analogue temperature sensor (-40°C to 125°C).
  • Infra-red receiver.
  • Lithium-polymer real-time clock (RTC) backup battery.
  • Bootloader - no external programmer necessary.
  • MicroSD card slot.
  • USB, with USB On-The-Go.
  • M25P80 Serial Flash memory (8Mbit).
  • LAN8720A Ethernet PHY (STM32 board only).
  • Piezo buzzer.
  • RGB LED.
  • Photosensor for measuring ambient light.
  • Reset button and on/off switch.
  • Example programs.

Shields / Accessories

Shield Shields, which plug into and extend the functionality of the mikroMedia Plus board, are available. Shields cost R240* when purchased together with a mikroMedia Plus system.
The following accessories are available:
Accessory Price
2000mAh Li-Po Battery R210*
Plastic Stylus (for Touch-Panel) R30*

Systems
System Microcontroller Shield Features
PIC32 PIC32MX795F512L 4 mikroBus sockets, physical layer for CAN, Ethernet connector and USB-UART module (with miniUSB connector).
STM32F4 ARM STM32F407VGT6 4 mikroBus sockets, physical layer for CAN, Ethernet connector and USB-UART module (with miniUSB connector).
STM32F7 ARM STM32F746ZG 4 mikroBus sockets, physical layer for CAN, Ethernet connector and USB-UART module (with miniUSB connector).
Stellaris ARM LX4F232H5QD 4 mikroBus sockets, physical layer for CAN, and USB-UART module (with miniUSB connector).


MikroMedia 5" From
R3,600*
Main Boards
MikroMedia 5" boards feature:
  • 800x480 5" Touch-screen TFT display.
  • 3.5mm headphone jack and VS1053 stereo MPEG codec.
  • ADXL345 Accelerometer.
  • Lithium-polymer battery connector and charging circuit.
  • Nordic nRF24L01+ 2.4GHz RF transceiver with chip antenna.
  • MCP9700A analogue temperature sensor (-40°C to 125°C).
  • Infra-red receiver.
  • Lithium-polymer real-time clock (RTC) backup battery.
  • Built-in USB programmer and debugger.
  • MicroSD card slot.
  • USB, with USB On-The-Go.
  • Fast MT48LC4M16A2 8MB SDRAM.
  • RJ45 Ethernet connector, LAN pulse transformer and filter.
  • Piezo buzzer.
  • RGB LED.
  • Photosensor for measuring ambient light.
  • Reset button and on/off switch.
  • Example programs.
Shields / Accessories

Shield Shields, which plug into and extend the functionality of the mikroMedia Plus board, are available. Shields cost R530*.
The following accessories are available:
Accessory Price
2000mAh Li-Po Battery R210*
Plastic Stylus (for Touch-Panel) R30*

Systems
System Microcontroller Shield Features
Tiva ARM TM4C129xNCZAD 4 mikroBus sockets, physical layer for CAN, and USB-UART module (with miniUSB connector).


MikroMedia 7" From
R3,900*
Main Boards
MikroMedia 7" boards feature:
  • 800x480 7" Touch-screen TFT display.
  • 3.5mm headphone jack and VS1053 stereo MPEG codec.
  • ADXL345 Accelerometer.
  • Lithium-polymer battery connector and charging circuit.
  • Nordic nRF24L01+ 2.4GHz RF transceiver with chip antenna.
  • MCP9700A analogue temperature sensor (-40°C to 125°C).
  • Infra-red receiver.
  • Lithium-polymer real-time clock (RTC) backup battery.
  • Built-in USB programmer and debugger.
  • MicroSD card slot.
  • USB, with USB On-The-Go.
  • Additional 8MB serial flash memory.
  • RJ45 Ethernet connector
  • Piezo buzzer.
  • RGB LED.
  • Photosensor for measuring ambient light.
  • Reset button and on/off switch.
  • Example programs.

MikroMedia HMI From
R1,350*
MikroMedia HMI; boards feature:
  • 3.5" to 7" NonTouch/Touch-screen display.
  • 320x240 to 800x480 Size.
  • FT900Q Microcontroller Unit.
  • 100MHz, 310DMIPS MCU speed.
  • 256KB Flash on MCU.
  • 2xCAN, 2xSPI, 2xI2C, I2S, UART
  • FT8xx Graphics Controller with NonTouch/ResistiveTouch/CapacitiveTouch variants.
  • 8MB Flash = MicroSD card slot.
  • Audio Speaker.
  • Haptic Feedback Engine on 4.3" to 7" screens
  • Mounting Frame
System
3.5" without Touch
3.5" Resistive Touch
3.5" Capacitive Touch
4.3" without Touch
4.3" Resistive Touch
4.3" Capacitive Touch
4.3" Capacitive Touch UXB
4.3" Capacitive Touch UXW
5.0" without Touch
5.0" Resistive Touch
5.0" Capacitive Touch
5.0" Capacitive Touch UXB
5.0" Capacitive Touch UXW
7.0" without Touch
7.0" Resistive Touch
7.0" Capacitive Touch
7.0" Capacitive Touch UXB
7.0" Capacitive Touch UXW

MultiMedia for PIC32MX From
R1,650*
PIC32MX7 MultiMedia Board MultiMedia boards are available for the PIC32MX4 and PIC32MX7.
MX4 MX7 Feature
Tick Tick 320X240 Touch-screen TFT display
Tick Tick 2 X 3.5mm jack (mic / headphones), stereo codec
Tick Tick SD card slot
Tick Tick USB Bootloader, Microchip ICD2/ICD3 connector
Tick MikroProg programmer connector (MX4 is possible if adapted)
Tick Tick USB host and slave connectors
Tick Tick RS232 with MAX232
Tick Tick Accelerometer
Tick Tick Serial Flash, Serial EEPROM
Tick Tick Joystick button
Tick   ZigBee support (ZigBee module sold seperately)
  Tick Ethernet

SmartGLCD R1,300*
SmartGLCD SmartGLCD is a complete package for developing graphical touch-screen applications, using a PIC18F8722.
It features:
  • 240X128 Graphic LCD.
  • RGB backlight.
  • Touch-screen.
  • MicroSD card slot.
  • USB.
  • Bootloader - no external programmer necessary. Also compatible with MikroProg programmer.
  • Example programs.

*Prices exclude VAT and may be subject to the Rand/Dollar exchange rate / change without notice. Please see the store for more information on pricing.