Please note that "On Special" pricing is only valid for local stock, whilst local stock lasts :-).

X
+27 (0)11 022 5323 +27 (0)81 410 5285
Basket/Checkout
R
- -
Funnel Filter:
Connection Interface
General What's This?
IDC10 What's This?
mikroBUS What's This?
MagnifierSearch:
LCD / TFT Displays (Go to Parent Category)
Breakout boards for various LCD and TFT displays.

(i) Tip:The filter on the left can be used to narrow down the number of items in this category.
  • Items
-
LCD mini click
 
mikroBUS
LCD mini click LCD mini click displays 2x16 monochrome characters on an LMB162XFW LCD display. It features the MCP23S17 port expander and the MCP4161 digital potentiometer, both from Microchip. LCD mini click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over SPI interface and the following pins on the mikroBUS™ line: PWM, INT, RST, AN.
LCD purchased seperately.
R300  Qty:
Price ex. VAT. Weight: 37g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
OLED B/W Click (Monochrome)
 
mikroBUS
OLED B/W Click (Monochrome) OLED click carries a 96 x 39px white or blue monochrome passive matrix OLED display. The display is bright, has a wide viewing angle and low power consumption. To drive the display, OLED click features an SSD1306 controller. It's built-in functionalities include contrast control, normal or inverse image display, vertical and horizontal scrolling functions and more. OLED click can communicate with the target board MCU either through SPI or I2C mikroBUS lines. You switch between output options by resoldering the onboard SEL COMM jumpers (J1, J2 and J3) to the appropriate position. OLED click uses a 3.3V power supply.
White Display    R380  Qty:
Price ex. VAT. Est. Weight: 15g. Stock: Available in 5-10 working days [i]. mikroE Icon
Blue Display    R380  Qty:
Price ex. VAT. Est. Weight: 15g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
OLED C Click (Colour)
 
mikroBUS
OLED C Click (Colour) OLED C click lets you add a small but bright and crisp 1.1" full-color display to your design. It carries a passive matrix OLED display capable of displaying 65K colors, and a SEPS114A display driver and controller. The controller has numerous built-in functionalities like vertical scrolling, horizontal panning, fade in/out, a programmable panel size (partial display), a power saving mode and more. OLED C click communicates with the target board through mikroBUS SPI lines: CS, SCK, and MOSI (SDI); and AN (R/W), PWM (A/C) and RST lines. OLED C click uses a 3.3V power supply.
R450  Qty:
Price ex. VAT. Est. Weight: 15g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
OLED Switch click
 
mikroBUS
OLED Switch click If you are building any type of human machine interface, OLED Switch click can help you keep the design simple, clear and interactive. It can be used in designing a control panel for an industrial machine... or a DIY arcade.

This board has a module that combines a button and a full color organic LED display, plus input/output screw terminals for connecting an external circuit (to toggle it on and off).

The mechanical button itself is nicely built, with a translucent black housing. When pressed, it gives satisfying tactile feedback.

The display, built in the button itself, can show 64 by 48 pixel images with up to 65k colors (16-bit depth).
R1,450  Qty:
Price ex. VAT. Stock: Available in 5-10 working days [i]. mikroE Icon
-
eINK click
 
mikroBUS
eINK click eINK click is an adapter for connecting eINK displays, with a 24pin ribbon cable. The eINK display sold with the click can retain the image even when the power is off. The click is designed to run on a 3.3V power supply. It communicates over SPI interface.
R915  Qty:
Price ex. VAT. Est. Weight: 26g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
TFT Proto 2.8"
 
General
TFT Proto 2.8" The TFT-PROTO Board contains the MIO283QT-9A 2.8" TFT color display 320x240 with resistive touch screen and ILI9341 display controller. This board can be easily connected to your development board or prototype device. On-board Marks describe connections and some other useful notes.
R480  Qty:
Price ex. VAT. Est. Weight: 25g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
mikroTFT (2.8")
 
General
mikroTFT (2.8") mikroTFT is a breakout board for MI0283QT-9A 2.8" TFT color display with 320 x 240 pixel resolution, driven by ILI9341 display controller. TFT display is covered with a resistive touch panel which can be used as an input device. For further connectivity two 1x26 side headers are provided. Mounting holes (∅ 2.29 mm) located in each corner simplify integration. Board is designed in the same form factor as mikromedia boards. This allows you to easily switch from mikroTFT to mikromedia, and vice-versa, while retaining most of the integration features.
On SpecialOn SpecialOn Special R345  R480  Qty:
Price ex. VAT. Est. Weight: 25g. Stock: 1 available immediately [i]. mikroE Icon
-
TFT Proto 4.3"
 
General
TFT Proto 4.3" TFT Proto 4.3" carries a 480x272 ATO43B35 TFT screen covered with a 4-wire resistive touchscreen panel. To drive the 262k-color display, there's an SSD1963 graphic controller with a 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode (accessed through the GPIO0 pin on the side of the board). The touchpanel is driven by an advanced STMPE811 controller. The board is lined with two rows of 26 pins for interfacing it with your MCU. TFT Proto 4.3" uses a 3.3V power supply only.
R1,050  Qty:
Price ex. VAT. Est. Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
TFT Proto 5"
 
mikroBUS
TFT Proto 5" TFT Proto 5" carries a 800x480 HT050AWV40T TFT screen covered with a 4-wire resistive touchscreen panel. To drive the 262k-color display, there's an SSD1963 graphic controller with a 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode (accessed through the GPIO0 pin on the side of the board). The touchpanel is driven by an advanced STMPE811 controller. The board is lined with two rows of 26 pins for interfacing it with your MCU. TFT Proto 5" uses a 3.3V power supply only.
R1,150  Qty:
Price ex. VAT. Est. Weight: 30g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
TFT PROTO 5" Capacitive
 
General
TFT PROTO 5" Capacitive TFT PROTO 5" Capacitive carries the 800x480 RVT50AQTNWC00 TFT screen. The SSD1963 display controller drives the TFT display, with a 1215K byte buffer that supports up to 864x480 at 24bpp displays.
R1,450  Qty:
Price ex. VAT. Weight: 140g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
TFT Proto 7"
 
General
TFT Proto 7" TFT Proto 7" carries a 800x480 FRD070IF40-A TFT screen covered with a 4-wire resistive touchscreen panel. To drive the 262k-color display, there's an SSD1963 graphic controller with a 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode (accessed through the GPIO0 pin on the side of the board). The touchpanel is driven by an advanced STMPE811 controller. The board is lined with two rows of 26 pins for interfacing it with your MCU. TFT Proto 7" uses a 3.3V power supply only.
R1,300  Qty:
Price ex. VAT. Est. Weight: 35g. Stock: Available in 5-10 working days [i]. mikroE Icon
-
LCD Mono Click
 
mikroBUS
LCD Mono Click

LCD Mono Click is a Click board™ that uses the LS013B7DH03 LCD display from Sharp which combined with the EFM32, from Silicon Labs, and its energy saving capabilities creates a powerful display application. The application is capable of driving a 128x128 pixel display drawing as little as 2 µA while showing a static image. Even when updating the frame every second the current consumption can be lower than 5 µA.

LCD Mono click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

R1,000  Qty:
Price ex. VAT. Weight: 20g. Stock: Available in 5-10 working days [i]. mikroE Icon
-

Looking for more display products? Please try the Media Boards, FT8xx EVE Displays and Display Components categories.