+27 (0)11 022 5323 +27 (0)81 410 5285
Basket/Checkout
R
- -
MagnifierSearch:
Keylock click (Go to Parent Category)

Keylock click Keylock click carries a processed sealed key lock mechanism that can be set in three different positions. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the PWM, INT, and AN pin on the mikroBUS™ line. The click board™ comes with two keys and a protective cap for the mechanism.
R400  Qty:
Price ex. VAT. Stock: Available in 5-10 working days [i]. mikroE Icon
  • Description

Keylock click carries a processed sealed key lock mechanism that can be set in three different positions. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the PWM, INT, and AN pin on the mikroBUS??? line.

The key can be removed from the lock in any of the three positions. The package contains two keys and one protective cap. 

Keylock features

The contact mechanism provides unequaled logic-level reliability and smoother, positive detent actuation.

Detent mechanism, with its spring-operated steel ball, gives crisp, positive action for accurate switch setting.

Specifications

Type Joystick
Applications Use the three different positions of the mechanism to turn applications on or off, for home security applications, for industrial equipment, etc.
On-board modules Keylock switch with 3 positions
Interface GPIO
Input Voltage 3.3V or 5V
Click board size S (28.6 x 25.4 mm)

Pinout diagram

This table shows how the pinout on Keylock click corresponds to the pinout on the mikroBUS??? socket (the latter shown in the two middle columns).

NotesPinMikrobus logo.pngPinNotes
Output position 1 1 1 AN PWM 16 2 Output position 2
NC 2 RST INT 15 3 Output position 3
NC 3 CS TX 14 NC
NC 4 SCK RX 13 NC
NC 5 MISO SCL 12 NC
NC 6 MOSI SDA 11 NC
Power supply +3.3V 7 3.3V 5V 10 +5V Power supply
Ground GND 8 GND GND 9 GND Ground

Programming

Code examples for Keylock click, written for MikroElektronika hardware and compilers are available on Libstock.

Code snippet

This is a simple example of how Keylock click works, depending on the state of the Keylock click the appropriate position will be detected.

01 uint8_t state;
02 char txt[20];
03 
04 void systemInit()
05 {
06     ANCON0 = 0x00;
07     ANCON1 = 0x00;
08     ANCON2 = 0x00;  
09    UART1_Init(9600);
10 }
11 
12 void Keylock_Init()
13 {
14     KEYLOCK_STATE_1_Direction = 1;
15     KEYLOCK_STATE_2_Direction = 1;
16     KEYLOCK_STATE_3_Direction = 1;
17 }
18 
19 void Keylock_Task()
20 {
21     state =  KEYLOCK_STATE_1*1 + KEYLOCK_STATE_2*2 + KEYLOCK_STATE_3*3;
22     UART1_Write_text("Keylock is in state:");
23     IntToStr(state,txt) ;
24     UART1_Write_Text(txt);
25     UART1_Write_Text( "rn" );
26     delay_ms(500);
27 }
28 
29 void main()
30 {
31     systemInit();
32     Keylock_Init();
33 
34    while( 1 )
35     {
36             Keylock_Task();
37     }
38 }

Downloads