Our new website is available at new.dizzy.co.za :-).

X
+27 (0)11 022 5323 +27 (0)64 681 8495
Basket/Checkout
R
- -
MagnifierSearch:
Secure 2 click (Go to Parent Category)

Secure 2 click Secure 2 click carries the ATAES132A, a cryptographic coprocessor with secure hardware-based key storage from Microchip. The click is designed to run on either 3.3V or 5V power supply. Secure 2 click communicates with the target microcontroller over SPI and I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line.
R190  Qty:
Price ex. VAT. Stock: Lead-time applicable [i]. mikroE Icon

Secure 2 click carries the ATAES132A, a cryptographic coprocessor with secure hardware-based key storage from Microchip. The click is designed to run on either 3.3V or 5V power supply. Secure 2 click communicates with the target microcontroller over SPI and I2C interface, with additional functionality provided by the INT pin on the mikroBUS??? line.

ATAES132A features

The ATAES132A is a high-security, Serial Electrically-Erasable and Programmable Read-Only Memory (Serial EEPROM) providing both authentication and confidential nonvolatile data storage capabilities. Access restrictions for the 16 user zones are independently configured, and any key can be used with any zone. In addition, keys can be used for standalone authentication.

The AES-128 cryptographic engine operates in AES-CCM mode to provide authentication, stored data encryption/decryption, and Message Authentication Codes. Data encryption/decryption can be performed for internally stored data or for small external data packets, depending upon the configuration. Data encrypted by one ATAES132A device can be decrypted by another, and vice versa.

Specifications

Type EEPROM
On-board modules ATAES132A - a cryptographic coprocessor with secure hardware-based key storage from Microchip
Key Features Crypto element device with secure hardware-based key storage, 512 bit OTP (One Time Programmable) Bits for Fixed Information
Interface I2C,SPI
Input Voltage 3.3V or 5V
Click board size M (42.9 x 25.4 mm)

Pinout diagram

This table shows how the pinout on Secure 2 click corresponds to the pinout on the mikroBUS??? socket (the latter shown in the two middle columns).

NotesPinMikrobus logo.pngPinNotes
NC 1 AN PWM 16 NC
NC 2 RST INT 15 AUTH Auth signaling
Chip select CS 3 CS TX 14 NC
SPI clock SCK 4 SCK RX 13 NC
Slave data out for SPI SDO 5 MISO SCL 12 SCL I2C clock
Slave data in for SPI SDI 6 MOSI SDA 11 SDA I2C data
Power supply +3.3V 7 3.3V 5V 10 +5V Power supply
Ground GND 8 GND GND 9 GND Ground

Programming

Code examples for Secure 2 click, written for MikroElektronika hardware and compilers are available on Libstock.

Code snippet

The following code snippet shows functions that will lock the configuration zone of the device and then output a generated random number.

01 //Configuration zone locking
02     if (aes132m_execute(AES132_LOCK, 0x02, 0x0000, 0x0000,
03                         0, 0, 0, 0, 0, 0, 0, 0, txBuffer, rxBuffer)
04                         == AES132_FUNCTION_RETCODE_SUCCESS)
05     {
06         LOG( "rnrn Configuration zone locked! " );
07     }
08     else
09     {
10         LOG( "rnrn Configuration zone locking failed" );
11         LOG( " or it is already locked." );
12     }
13     memset (txBuffer, 0, 84);
14     memset (rxBuffer, 0, 36);
15 /*
16     Fourth test - Random number generator
17     Will only return 0xA5 unless config zone is locked first.
18 */
19     if (aes132m_execute(AES132_RANDOM, 0x00, 0x0000, 0x0000,
20                         0, 0, 0, 0, 0, 0, 0, 0, txBuffer, rxBuffer)
21                         == AES132_FUNCTION_RETCODE_SUCCESS)
22     {
23         LOG( "rnrn Generated random number: " );
24         outputHex (&rxBuffer[2], 16);
25     }
26     else  LOG( "rnrn Random number generation failed..." );
27 
28    memset (txBuffer, 0, 84);
29     memset (rxBuffer, 0, 36);

Downloads